Directions for Use

Preparing the Surface:
All surfaces must be clean and free from debris. Always test product in an inconspicuous area for suitability.

When properly applied SureSeal Stone Sealer will protect marble, granite, slate, limestone, sandstone, terrazzo, agglomerates, brick, grout, and many other masonry products

Directions for Application:
Completely wet the surface by applying SureSeal Stone Sealer with a paint brush, roller, SureSeal Pump Sprayer or an airless sprayer. Apply one coat with smooth even strokes, thoroughly saturating the surface being treated. In heavy walkway areas, two coats are recommended. At least one hour drying time is recommended before using the treated area. For optimum protection, allow to cure for 24 hours.

To clean exterior treated areas, use a garden hose with a pressure nozzle or pressure washer with a maximum pressure of 1000 PSI. For interior applications simply mop or wipe with a soft cloth or sponge and a ph neutral cleaner like SureSeal Multipurpose Cleaner. Do not use harsh cleaning agents such as abrasive powders, ammonia, acids, bleach, solvents or abrasive scrubbing pads.

Coverage: Up to 600 to 1500 square feet per gallon. Coverage is approximate and will vary depending on the surface being treated and the applicator.

Note: Consult the SureSeal Stone Sealer Material Safety Data Sheet for details regarding Hazardous Properties and Personal Protective Equipment requirements.

SureSeal USA © 2005 | Privacy Policy | Terms Of Use